EN
Open 24/7 Call
Programming

How key programming works

Every modern key carries a chip, and the car only starts when it recognizes that chip. Programming is how a new chip gets on the car's list.

  • Written by a locksmith
  • Real prices
  • Service in Metro Atlanta
In short
  • The immobilizer keeps a list of approved keys
  • Programming adds a key to that list, usually through the diagnostic port
  • Some cars need a security PIN or online access
  • Some need the module read directly (EEPROM)

Through the port

Most cars: a programmer plugs into the port under the dash, gets security access and registers the new key.

PIN codes and online access

Some makes require a security code. Some newer cars need online authorization from the manufacturer.

Reading the module

When the port isn't enough, the module comes out and its memory is read and written directly. A careful technician saves a backup first.

Erasing lost keys

Programming also lets lost keys be removed from the list so they no longer start the car.

FAQ

Questions about this

Can I program a key myself?

On some older cars, with a working key and an owner procedure. Most newer cars need a programmer.

Ask a locksmith

Your car, ZIP code and your question. In Metro Atlanta we can also do the job.

Send as text

Need it done in Atlanta? Call(470) 469-1578

LocksmithUS is written by the technician behind Keyhub Locksmith in Marietta, GA. Read the guides anywhere; if you're in Metro Atlanta, we can make the key at your car, 24/7.

keyhubllc@gmail.com · LocksmithUS · Keyhub LLC · Marietta, GA
Open 24/7 · (470) 469-1578